to Videolink arrow

Newton logo to print




In the Colorado desert in 1992, a speeder was clocked going 110 kilometers (68 miles) per hour. No ticket was issued to the driver. A lapse in law enforcement? Not at all. The Dexter Hysol Cheetah, an experimental bicycle, had just broken the world record for human-powered speed. The Cheetah incorporated many new innovations in bicycling-a recumbent seating angle, aerodynamic fairing, and the latest lightweight materials. The result was a milestone in the annals of two-wheel transportation. Two principles of physics explain how a bike works. First, angular momentum, the same force at work in a gyroscope, makes wheels want to keep turning in the same direction and position as they have been. So as your bike wheels spin underneath you, they're actually helping you stay upright as their angular momentum resists changes in the bike's upright position. Second, because of the way bicycles are constructed, inertia swings the upper part of a bicycle away from the center of a turn, even as the front wheel dips into the turn, keeping the bike in an upright position. Bicycles have undergone few design changes since they were first invented. The earliest known bicycle design dates back to the 1490s, when a student of Leonardo da Vinci sketched a vehicle which looks remarkably like today's bicycle. The first functioning velocipedes of the 19th century also strongly resembled today's bikes, with two wheels of the same size. The old-fashioned bicycles most people think of with enormous front wheels and tiny back wheels were actually invented later. Called "ordinaries," these bikes were fun and fast, but quite unstable and dangerous. Most innovations in biking happened as a result of the energy crisis of the '70s. Many of these innovations have already been incorporated into competition-class bicycles, such as aerodynamic carbon-fiber frames. Other improvements include wheels that attach on only one side, two-wheel drive for more traction, and tension wires that offer extra stability for less weight. Recumbent bicycles are also becoming popular, in part because the rider's lower center of gravity makes the bike more stable. Not only are you less likely to fall off - it's a shorter distance to the ground if you do!


Find out how to bike more efficiently by calculating gear ratios. The main driving action in a bicycle happens because of a gear system. Calculate the gear ratios of your bike, make predictions based on your calculations, and test them with a ride. Materials
  • one multigear bicycle
  • pencil and paper
  • measuring tape
  • bike helmet
1. Stand the bicycle up. Count the number of teeth on the largest chain ring (the circle with the teeth that's connected to your pedals). Then count the teeth on the biggest and the smallest cogs on the back wheel. 2. Calculate the gear ratios for the biggest and smallest back cogs. The ratios will be for your highest and lowest gears. The formula for calculating gear ratios is: gear ratio = number of teeth on the back cog - divided - by - number of teeth on the front The ratio for your highest gear should be smaller than for the lowest gear. That's because the gear ratio measures how many rotations of the pedals you need to turn the back wheel once. So it makes sense that the higher the gear (with a greater number of teeth on the front gear and/or a lesser number on the back gear), the less often you have to turn the pedals to make the wheels go around. 3. Pedaling produces torque (rotary force) in the front gear, which is transmitted to the rear wheel. Compare the two gears by riding the bike first set at the highest gear and then set at the lowest. Do you have to push harder to start the bike in the higher gear? Which gear ratio is better for starting? Knowing the lowest and highest gear ratios, can you roughly predict the ratios for different gear settings in between? Don't forget your helmet! 4. With your gear ratios, figure out how many times you would need to pedal in high versus low gear to get from one end of an area to another. First, measure how long a distance you will cover. Then figure the circumference of your wheels, using this formula: circumference = diameter of wheel x pi Now work backwards from your distance measurement to figure out how many rotations of your wheel it will take to travel from one end to the other: ??? distance you want to cover --- ??? circumference of wheel Use gear ratios to calculate how many times you would need to move your feet around to cover the distance. Remember, gear ratios are the relationship between pedals and wheels. Questions 1. Which gear ratio makes you move your feet more? 2. Which gear is more efficient for biking on level ground-high or low?


  • Ballantine, R. & Grant, R. (1992) Richards' ultimate bicycle book. New York:
    Dorling Kindersley.
  • Dream machines. (1992, Feb) Bicycling, pp. 56-58.
  • Evolution of a dream: From Da Vinci to Daedalus. (1988, Dec) Bicycling, pp.
  • Fisher, L. (1992, Aug 5) Shifting a bike with centrifugal force. The New York
    Times, p. D4.
  • Korten, Tristram. (1991, Jan 21) Pedal power. Design News, pp. 111-114.
  • McGurn, J. (1987) On your bicycle: An illustrated history of cycling. New York:
    Facts On File Publications.
  • Posth, M.A. (1993, Oct) The world's fastest bike. Popular Science, pp. 78-80.
  • Sullivan, K. (1992, July 12) Laid-back bikers love this cycle. The Washington
    Post, p. B1.
  • Thisdell, D. (1992, Sept 12) For sale: The world's fastest bicycle. New
    Scientist, p. 23.
    Additional resource
    NEWTON'S APPLE Show 501 (high-speed bicycles). GPN: (800) 228-4630.